Automatic Drains

Author: Kathleen Chester

An automatic drain is used for discharging the accumulations of condensable and unwanted foreign materials from a pneumatic system. The principal constituent of an automatic drain is a drain valve, which consist of a reservoir. The reservoir has an inlet and outlet for the entry and exit of accumulations within the pneumatic system. For selective communication of pressurized air, there is a valve operator. It is mounted in the reservoir in such way that automatic opening and closing of the valve takes place for selective draining.

The pilot valve comprises of a sensor tube in which there is a magnetized valve plug. This magnetized valve plug helps in selectively engaging the valve seat and valve plug for making the one-way flow possible. Both the valve seat and the valve plug have a magnetic polarity. Opposite to its polarity, there is an annular magnet dispersed within the reservoir. It senses the level of the float. The entire action is based on the opposite polarity of these two magnets, so that discharge can easily pass out in one direction after entering from the other direction. As the level of the water increases and decreases, the float, immersed in water, successively rises and falls.

The main functions of these automatic drains are freeze protection capability, longer watering season, faster winterization, easy method of installation, and guaranteed performance. There are automatic wings for easy installation and a dirt stopper screen is provided with it. There is a patented recessed wicking pad and patented ball valve which creates turbulent flashing action, installed in the automatic drain. Products obtained from a genuine source don?t burst usually. In case you are concerned with lesser water consumption, offsetting drainage by shortening cycles in just a minute?s time is the best option.

There are a wide number of products devised for the benefit of the customers. These products are available online. The products include the following:

Mainline Drains: SPRHP400050 Blazing 1/2" MPT Mainline Drain has an excellent turbulent flushing action has all the facilities like dirt-stopper screen, easy-install wings and patented recessed wicking pad. It can withstand up to 2500 psi burst pressure.

Swing pipe elbow drains or SPRFP1800 Blazing 1/2" MPT to Funny Pipe (Swing Pipe) Lateral Line Drain is priced reasonably.

Poly pipe end of line drains: SPRHP1500 Blazing 3/4" Poly x 1/2" FPT End of Line Drain has an insert elbow with a drain built in. The price offered by at online shops is quite reasonable.

PVC Pipe end of line Drains: SPRHP1200 Blazing 3/4" SOC x 1/2" FPT End of Line Drain consists of durable PVC construction and has all the advantages like dirt stopper and easy install wings etc.

Siphon Drain?, SPRSD1000 Blazing Siphon Drain for 1/2" to 1" (Install on PVC or Polyethylene in 3 Seconds) would enable you to save your labor and has easy method of fitting with clamps and cement. Grommots are available for easy installation.

Article Source: http://www.articlesbase.com/small-business-articles/automatic-drains-489089.html

About the Author

For Automatic Drains Log on to SprinklerMart.com that ensures optimum benefit.

This article has been viewed 346 times.

Talking About it... (0 Comments)
Automatic Drains

Plumbing Professionals!

Join our directory for FREE, receive emergency calls in your area of service and get exposed to new clients!

Fast Articles Search

* First Name

* Last Name

* Address

* Zip Code

* Phone
- -

Other Phone
- -

Describe your project

* Email

* Name: (Company Name)
* Email:	- Not Published
Website Address:
* Comment: No Tags Allowed	You have 200 characters remaining.
* Code:
* Captcha: